Fridges - Body Shop

• Load lock / Kickstrip / Rubrail fitted to panels before assembly
• Three body jigs, all bodies bonded together with 2 pack glue
• Body designed to take moving bulkhead at later date
• Full length anodised aluminium cappings
• Kickstrip attached to side & floor for strength, grit floor floated over top

• Chassis 2 pack paint (5 year warranty)
• 7 positive body to chassis fixing points and 8 body clamps
• Colour code piping done after paint

• Floor fully sealed before top floor coat applied

• Fibreglass matting fitted full length
• Coloured gel coat applied
• Carburundum granules applied for non-slip surface finish
• Grit floor 6mm thickness, finished off with 7mm aluminium dump plate at rear

• Galvanised bulkhead protection / air return
• With pallet stops

• Standard stainless steel corner protection

• Production Flow
• Up to 15 trailers per week